{"product_id":"424003-hyzv","title":"98.5-03 7.3L CNC Fabrication Replacement High Pressure Oil Pump Lines","description":"\u003cp\u003eReplace your high-mileage (and expensive) OEM High Pressure Oil Pump lines with the Number 1 selling CNC Fabrication upgraded HPOP lines! \u003c\/p\u003e\n\u003cp\u003eEarly 99 - 03 Ford Powerstroke 7.3L Replacement High Pressure Oil Pump Lines.\u003c\/p\u003e\n\u003cp\u003eThese lines are to replace the typical high mileage expensive leaky OEM HPOP lines that have the STC fittings. Kit comes with 2 hoses and all necessary fittings to eliminate the quick connect fittings (STC) on the heads and the HPOP itself.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced HPOP lines with DuPont Teflon lining.\u003c\/li\u003e\n\u003cli\u003eBurst pressure rating of 16,000psi and working temperature rating of 400 F\u003c\/li\u003e\n\u003cli\u003eNominal working pressure is 5000psi at 72 F and 3000psi at 400 F\u003c\/li\u003e\n\u003cli\u003eKit comes with Genuine Brennan fittings\u003c\/li\u003e\n\u003cli\u003eHigh quality Viton o-rings\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*Crossover line in the engine picture is not included*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eINSTALLATION:\u003c\/strong\u003e\u003c\/em\u003e  \u003c\/p\u003e\n\u003cp\u003eDisconnect the battery grounds before installation to avoid accidentally arc'ing the line on the glow plug relay or the alternator charging lug. Use pictures from the product webpage for routing example. The fittings are marked with numbers to label install location (see below for reference). After installation, be sure there is no other lines\/wires that are touching the lines that could potentially rub through and damage either the HPOP line or the other line that may be touching it.  Use a small section of wire loom protector or a larger piece or rubber hose to wrap around the contact point.  Many will remove or bend the engine eyelet on the driver side as a precaution, but it is not necessary.  Sealant is not necessary, but \u003cstrong\u003eIF\u003c\/strong\u003e you choose to use any, use Loctite 680 or Permatex 64000 retaining compound (green) only on the fittings installed in the HPOP.  If you are unsure of installing yourself, seek out a competent and qualified technician to install the lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*\u003c\/strong\u003eREMOVE THE SPRING CHECKS IN THE PUMP UNDER THE STOCK FITTINGS, DO NOT RE-INSTALL\u003cstrong\u003e*\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOSE IDENTIFICATION: \u003cstrong\u003e98.5-03 Superduty 2 LINE \u003c\/strong\u003e- \u003c\/strong\u003eBOTH SIDES ARE SAME LENGTH \u003cstrong\u003e\u003cstrong\u003e94.5-97 \u003c\/strong\u003e\u003cstrong\u003eOBS 2 LINE \u003c\/strong\u003e- \u003c\/strong\u003ePASSENGER IS LONGER OF THE 2\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e**FOR ANY 3 LINE KIT THE SHORTEST LINE IS THE CROSSOVER HOSE**\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITTING MARKINGS: 1\u003c\/strong\u003e- FRONT PUMP PORT \u003cstrong\u003e2\u003c\/strong\u003e- REAR PUMP PORT \u003cstrong\u003e3\u003c\/strong\u003e- DRIVER HEAD \u003cstrong\u003e4\u003c\/strong\u003e- OBS PASSENGER HEAD \u003cstrong\u003e5\u003c\/strong\u003e- SD PASSENGER HEAD AND CROSSOVER \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePump Fittings: 28FT\/LBS • Head Fittings: 23FT\/LBS • Hose Ends: 21FT\/LBS\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"CNC Fabrication","offers":[{"title":"Default Title","offer_id":52857789022492,"sku":"424003","price":176.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0092\/1619\/6665\/files\/2_lines.webp?v=1756998829","url":"https:\/\/holdersdiesel.com\/products\/424003-hyzv","provider":"Holders Diesel Performance","version":"1.0","type":"link"}