These are our stage 2 towing/hot street injector. They displace 180cc of fuel and are all a single shot style injector. You will need custom tuning for these to run to their full potential. We recommend running a stock-100% nozzle with these depending on your goals. The smaller nozzle will help with fuel atomization and controlling EGT’s for towing while the larger nozzle will be better for top end power. These may require fuel system upgrades. We always recommend you check your fuel pressure after installation and ensure it never drops below 45 psi under load.
***If sending in 99-03 year model injector cores there will be an additional $150 charge for converting them to single shot style injectors***
This is not an exchange program. This is a rebuild service that you have to send your injectors in to be rebuilt and you get back the same injectors you sent in to be rebuilt. So you know the mileage and history of the injectors. If you are sending in AD or AE code injectors for a performance upgrade there will be an additional $150 charge for converting them to single shot injectors. Once we receive these injectors they get cleaned and inspected. Then we replace the plunger and barrel assembly, nozzle, nozzle lift spring, poppet spring, refinish all sealing surfaces and install all new seals and gaskets. After completion these are bench tested on our Hartridge HA-230 flow bench to ensure flow rates and functionality. These include a 12 month warranty. If your injectors cannot be rebuilt with this service we will contact you and give you and proceed from there. .
Vehicles
- 1995-2002 Ford F-250
- 1995-2002 Ford F-350
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.