5.9L 2003-2004 Cummins Full Running Workhorse Dodge Ram Diesel Crate Engine Choate Performance

CHOATE 5.9L Full Runner Workhorse Engine 2003-2004 - Dodge Cummins Diesel Engine

CHOATE Part Number: CEP59CLW0304
Fitment: Fits 2003-2004, Dodge 5.9L Cummins Equipped Vehicles

This 5.9L Full Running Dodge Cummins Diesel Engine Includes just about everything bolted to the engine to make for a quick painless install. This includes but is not limited to the following: a factory original turbo, oil pump, water pump, engine sensors, fuel pump and injectors:

Long Block work is as follows:

• Coated, Flycut, and Delipped pistons
• O-ring heads
• Chromoly Pushrods
• Stage 2 Camshaft
• Our Built-in-house Heads-Magnuflux and pressure test heads
• Grind Valves
• New Induction Hardened Seats
• All New Valve Guides, Install New Valve Seals
• Test Spring Tension
• New Freeze plugs
• New Injector Cups.
• Head Studs included in our Daily Driver build, New Head Gaskets

Full CNC blueprint machining, (bore, deck, hone and line honed). The Cylinder bores are blueprint bored to a true 90 degrees from the crankshaft center line, prior to being diamond honed to within .0002 inch for precise piston to cylinder bore clearances.

We main bore and line hone the crankshaft which is honed to precisely align the crankshaft in the engine block. We bore the block back to the crankshaft center line and hone the block to Ra 13 finish. The piston diameter measured to the nearest .0001 inch matched to cylinder bores.

The Cylinder block is surfaced to a finish of 30 Ra or lower, which meets the factory specification in both flatness and smoothness for the block to head sealing surface. This is mandatory for proper sealing of a MLS Gasket.

Connecting Rods, New Damper All Manual will be charged the appropriate charges and will be balanced to a stock flywheel we have in stock or you will need to send in your Aftermarket in first. - Check both wrist pin and crank pin to rod clearances

• New upgraded Pistons .10- .30 inch over - New pistons, rings, Pin retainers weight matched prior to crank balancing
• New OE Lifters, Lifter Guides, OE Crank Flange Bolts, updated 9.800 OE Pushrods
• Crankshaft - Balanced with the Rotational assembly checked for run-out inspected for fatigue. Crankshaft is Polished and ground to .0005 concentricity or less
• Camshaft - Polished and Inspected
• New Rod, Main and Cam Bearings
• Install Rear Main Seal
• Install New Bed Seals
• Install New Rear Cover Gasket
• Install Upper and Lower Oil Pan Gaskets
• Install Pickup Tube O-ring
• Rear Cover Installed

CHOATE Engineering Performance Crate Engine Features:

600 HP rated. Designed with the working man in mind. The perfect platform for those who do heavy hauling regularly. Fully balanced.

Upgrades over the Daily Driver include but are not limited to:

• O-Ringed Heads
• Billet Flex Plate
• Coated, Fly Cut and Delipped Pistons
• Stage 2 Cam
• Chromoly Pushrods
• Welded Cam Gear.

Common Issues With The Dodge Cummins 5.9L Engine (and how we fix them)

Cylinder Heads- While there aren't as many issues with the bottom end of the Cummins, there are really BIG problems in the head department.

Valve seats fallout contacting the piston and cause catastrophic failure. We machine oversize valve seats within creased press fit area to remedy this issue.

Stamped gallery plugs in the heads blow out causing a mixture of oil and coolant, destroying the bearings. We thread the head and insert threaded plugs to make sure this issue never rears its ugly head.

Plus: Freeze plugs in the block blow out leaving you at best stranded on the side of the road, at worst, with a severely overheated engine in need of remanufacturing. Every new Choate Cummins engine comes standard with billet freeze plugs that are blow out proof using a tie bar bolting them into the side of the block.

Cummins 5.9L Early

Vehicles

• 2003-2003 Dodge Ram 2500 Laramie
• 2003-2004 Dodge Ram 2500 SLT
• 2003-2004 Dodge Ram 2500 ST
• 2003-2004 Dodge Ram 3500 Laramie
• 2003-2004 Dodge Ram 3500 SLT
• 2003-2004 Dodge Ram 3500 ST